ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
CAUTION
Be careful when installing crankshaft to prevent damaging oil seal.
(5)
Install crankshaft in cylinder block.
(6)
Install retaining plate with bolt.
(7)
Install flywheel, refer to paragraph 5.21.c.
(8)
Install piston and connecting rod assembly, refer to paragraph 5.20.e.
(9)
Install balancer shaft, refer to paragraph 5.19.c.
(10) Install camshaft, refer to paragraph 5.18.c.
(11) Align timing marks on gears (Figure 5-34).
(12) Install cylinder head assembly, refer to paragraph 5.13.c.
(13) Install crankcase cover, refer to paragraph 5.16.c.
DYNAMO.
a.
Testing.
(1)
Using multimeter set for volts AC, connect positive lead to TB1-5 and negative lead to TB1-6.
(On MEP-501A connect positive lead to TB1-6 and negative lead to TB1-7.)
(2)
Start generator set and check multimeter indication. Multimeter should indicate 40-50 VAC.
5-66
