ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
(2)
Install studs in cylinder block. Apply locking compound (Item 6, Appendix E) to studs.
(a) Torque head studs to 9-11 lb ft (12.2 - 15.0 Nm).
(b) Torque fuel pump studs to 5-7 lb ft (6.8 - 9.5 Nm).
(3)
Install oil fill cap/dipstick.
(4)
Install fuel filter assembly, refer to paragraph 4.15.c.
(5)
Install governor regulator bracket, refer to paragraph 4.52.d.
(6)
Install starter, refer to paragraph 4.57.b.
(7)
Install governor, refer to paragraph 5.24.c.
(8)
Install crankshaft, refer to paragraph 5.22.c.
(9)
Install crankcase cover, refer to paragraph 5.16.c.
(10) Install engine wiring harness, refer to paragraph 4.58.e.
(11) Install diesel engine, refer to paragraph 5.10.b.
