ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
c. Installation.
(1)
Position key (Figure 5-30) in slot on crankshaft.
(2)
Install flywheel on crankshaft with washer and nut. Apply lubricating oil (Item 14, Appendix E)
to nut. Using flywheel locking handle to hold flywheel, torque nut to 87-94 lbs-ft (118-127 Nm).
(3)
Install starter pulley on flywheel, refer to paragraph 4.54.c.
(4)
Install cooling fan cover, refer to paragraph 4.53.d.
CRANKSHAFT.
a. Removal.
(1)
Shut down generator set.
(2)
Remove crankcase cover, refer to paragraph 5.16.a.
(3)
Remove cylinder head assembly, refer to paragraph 5.13.a.
(4)
Remove camshaft, refer to paragraph 5.18.a.
(5)
Remove balancer shaft, refer to paragraph 5.19.a.
(6)
Remove piston and connecting rod assembly, refer to paragraph 5.20.a.
(7)
Remove flywheel, refer to paragraph 5.21.a.
(8)
Remove bolt (Figure 5-32) and retaining plate from cylinder block.
