ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
BALANCER SHAFT.
a. Removal.
(1)
Shut down generator set.
(2)
Remove crankcase cover, refer to paragraph 5.16.a.
(3)
Remove balancer shaft (Figure 5-20) from cylinder block.
(4)
If necessary, remove rear bearing from crankcase cover.
(5)
If necessary, remove front bearing from cylinder block.
b. Inspection.
(1)
Inspect balancer shaft for cracks, corrosion, worn gear, and other damage.
(2)
Inspect bearings for excessive play, signs of overheating, scoring, and other damage.
(3)
Replace damaged or worn parts.
c. Installation.
(1)
If removed, install front bearing (Figure 5-20) in cylinder block so bearing is flush with
surface of block.
Figure 5-20 Balancer Shaft
