ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
c. Installation.
(1) If removed, install small bearing (Figure 5-17) in cylinder block (Figure 5-18).
(2) If removed, install large bearing (Figure 5-17) in crankcase cover so bearing is flush with surface
of cover.
(3)
Position fuel injection pump tappet and valve tappets in cylinder block.
(4)
Carefully install camshaft in cylinder block.
(5)
Align timing marks on gears (Figure 5-19).
(6)
Install fuel injection pump, refer to paragraph 5.15.c.
(7)
Install cylinder head assembly, refer to paragraph 5.13.c.
(8)
Install crankcase cover, refer to paragraph 5.16.c.
5-53
