ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
(5)
Measure oil pump housing in crankcase cover:
(a) Inside diameter - 1.1457 - 1.1488 in. (29.100 - 29.18 mm).
(b) Depth - 0.3157 - 0.3189 in. (8.02 - 8.10 mm).
(6)
Replace damaged or worn parts.
c. Installation.
(1)
Insert inner rotor and shaft (Figure 5-16) through crankcase cover and install pin in shaft so equal
amounts protrude on each side.
(2)
Install outer rotor over inner rotor and new preformed packing in crankcase cover.
(3)
Install cover loosely with bolts, fill pump cavity with oil, and tighten bolts finger tight and 1/8 turn.
(4)
Install governor gear and spindle, refer to paragraph 5.24.c.
(5)
Install crankcase cover, refer to paragraph 5.16.c.
