ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
CAUTION
Keep exhaust and intake valve tappets separate.
(8)
Measure outside diameter of valve tappet stems [0.2705 - 0.2740 in. (6.870 - 6.960 mm)].
(9)
Measure outside diameter of fuel injection pump tappet [0.9405 - 0.9438 in. (23.890
23.972 mm)].
(10) Measure hole diameters in cylinder block for tappets:
(a)
Valve tappet holes - 0.2756 - 0.2780 in. (7.000 - 7.060 mm).
(b)
Fuel injection pump tappet hole - 0.9449 - 0.9472 in. (24.000 - 24.060 mm).
(11) Replace damaged or worn parts.
Figure 5-17. Camshaft
.
5-52
