ARMY TM 9-6115-641-24
AIR FORCE TO 35C2-3-456-12
NOTES:
PROCEDURES:
1. Dimensions shown are in inches.
1. Cut rope (1) to length indicated.
2. Refer to TM 9-6115–641-24P for materials
2. Crimp terminal (2) on one end of rope (1).
required.
Figure D-6 Cord, Load Wrench (P/N: 88-22460)
NOTES:
PROCEDURES:
1. Refer to TM 9-6115-641-24P for materials re-
1. Position 0.75 inch of insulation sleeving (2) on
quired.
each lead of diode (1), leaving 0.25 inch of bare
wire on each lead. Shrink sleeving to fit.
2. Crimp and solder terminals (3) on end of each
diode (1) lead.
Figure D-7. Diode Assembly (P/N: 88-22418-1)
D-7
