ARMY TM 9-6115-641-24
AIR FORCE TO 35C2-3-456-12
NOTES:
PROCEDURES:
1. Dimensions shown are in inches.
1. Remove and discard terminals supplied with
2. Refer to TM 9-6115-641-24P for materials re-
fuel pump (1).
quired.
2. Strip 0.125 inch of insulation from end of each
pump (1) lead.
3. Crimp pin (2) on end of each lead.
4. Insert pins (2) into housing (3) with red/white
wire in position 1 and black wire in position 2.
5. Mark strap (4) with “P13” and install in position
shown.
D-10
Figure D-10. Pump Assembly, Fuel (P/N: 88-20479)
