ARMY TM 9-6115-641-24
AIR FORCE TO 35C2-3-456-12
NOTES:
PROCEDURES:
1. Refer to TM 9-6115-641-24P for materials
1. Strip 0.125 inch of insulation from end of each
required.
solenoid (1) lead.
2. Crimp pins (2) on end of each solenoid (1) lead.
3. Insert pins (2) into housing (3) with “HOLD” wire
in position 1, “PULL” wire in position 2, and “C” wire
in position 3.
4. Mark strap (4) with “P14” and install in position
shown.
Figure D-12. Solenoid Assembly, Fuel (P/N: 88-20482)
D-12
