ARMY TM 9-6115-641-24
AIR FORCE TO 35C2-3-456-12
NOTES:
PROCEDURES:
1. Dimensions shown are in inches.
1. Remove and discard terminals supplied with
2. Refer to TM 9-611564124P for materials re-
fuel pump (1).
quired.
2. Strip 0.125 inch of insulation from end of each
pump (1) lead.
3. Crimp pin (2) on end of each lead.
4. Insert pins (2) into housing (3) with red wire in
position 1 and black wire in position 2.
5. Mark strap (4) with P11 and install in position
shown.
Figure D-11. Pump Assembly, Fuel (P/N: 88-22546)
D-11