TM 9-6150-228-13&P5-12CABINET ASSEMBLY - CONTINUED.b. Reassembly.(1) Install new gasket (24), if damaged, on door (19).(2) Install two flat washers (23), Iever (22), screw (21) and knob (20) on door (19).(3) Install two door assemblies (1 9) by sliding onto hinge.(4) Install six handles (18) and 30 rivets (17).(5) Install nameplate (1 6), four screws (1 5), and four nuts (1 4). Tighten nuts.(6) Install two latches (13) and four rivets (12).(7) Install ground lug (11) lockwasher (10) and screw (9). Install terminal lug (8), lockwasher (7) and nut (6). Torque nut (6) per Appendix H.(8) Install eight nuts (5) on U-bolt (4). Install your U-bolts (4), eight new lockwashers (2), flat washer (3) and nuts(1). Torque eight nuts (1) per Appendix H.INSTALLATIONRefer to Chapters 4 and 5 and install all components of the power distribution panel.5-24
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
