TM 9-6115-729-24
UNIT (FIELD) LEVEL MAINTENANCE
TACTICAL QUIET GENERATOR 100 kW, 50/60 Hz MEP-807A/PU-807A
FUEL TANK MAINTENANCE
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's (WP 0119, Item 1)
Materials/Part
References
Fuel drain valve and piping removed (WP 0056)
TM 9-6115-729-10
Front roof housing assembly removed (WP 0029)
TM 9-6115-729-24P
Engine compartment ceiling assembly removed
Personnel Required
Front section housing assembly removed (WP 0033)
One
Rear section housing assembly removed WP 0034)
Right center panel assembly removed (WP 0036)
WARNINGS
Metal jewelry will conduct electricity. All jewelry can become entangled in generator set
components. Remove all jewelry when working on generator set. Failure to comply can cause
injury or death to personnel by electrocution.
DO NOT wear loose clothing when performing checks, services and maintenance. Failure to
comply can cause injury or death to personnel.
High voltage is produced when this generator set is in operation. Make sure unit is completely shut
down and free of any power source before attempting any repair or maintenance on the unit.
Failure to comply can cause injury or death to personnel.
High voltage is produced when the generator set is in operation. Never attempt to start or
maintain the generator set unless it is properly grounded. Failure to comply can cause injury or
death to personnel.
DC voltages are present at generator set electrical components even with generator set shut
down. Avoid shorting any positive with ground/negative. Failure to comply can cause injury to
personnel and damage to equipment.
0062-1