TM 9-6115-729-24
UNIT (FIELD) LEVEL MAINTENANCE
TACTICAL QUIET GENERATOR 100 kW, 50/60 Hz MEP-807A/PU-807A
COOLANT RECOVERY SYSTEM MAINTENANCE
INITIAL SETUP:
Tools and Special Tools
Personnel Required
Shop Equipment, Automotive Maintenance,
One
Common No. 1 (WP 0119, Item 2)
Tool Kit, General Mechanic's (WP 0119, Item 1)
References
Materials/Parts
TM 9-6115-729-24P
Antifreeze (WP 0120, Item 5)
Cap and plug set (WP 0120, Item 6)
WARNINGS
Metal jewelry will conduct electricity. All jewelry can become entangled in generator set
components. Remove all jewelry when working on generator set. Failure to comply can cause
injury or death to personnel by electrocution.
DO NOT wear loose clothing when performing checks, services and maintenance. Failure to
comply can cause injury or death to personnel.
High voltage is produced when this generator set is in operation. Make sure unit is completely shut
down and free of any power source before attempting any repair or maintenance on the unit.
Failure to comply can cause injury or death to personnel.
High voltage is produced when the generator set is in operation. Never attempt to start or
maintain the generator set unless it is properly grounded. Failure to comply can cause injury or
death to personnel.
DC voltages are present at generator set electrical components even with generator set shut
down. Avoid shorting any positive with ground/negative. Failure to comply can cause injury to
personnel and damage to equipment.
WARNING
Cooling system operates at high temperature and pressure. Contact with high pressure steam
and/or liquids can result in burns and scalding. Shut down generator set, and allow system to cool
before performing checks, services, and maintenance. Failure to comply can cause injury or
death to personnel.
CAUTION
All fittings and openings must be capped or plugged immediately after opening to prevent
contamination of the coolant system.
0063-1
