ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
b. Removal.
(1) Shut down generator set.
(2) Note position of recoil starter assembly (Figure 4-56) to engine.
(3) Remove capscrews and recoil starter assembly from engine.
(4) If necessary, remove capscrews and pulley from engine flywheel.
c. Installation.
(1) If removed, install pulley (Figure 4-56) on engine flywheel with capscrews.
(2) Position recoil starter assembly on engine as noted when removed.
(3) Install capscrews and check recoil starter assembly for proper operation.
ENGINE OIL STRAINER.
a. Removal.
(1) Shut down diesel engine.
CAUTION
Avoid spilling of oil on ground to prevent environmental
contamination. Use chemical resistant gloves for spill cleanup.
Cleanup spills if you can do so without hazard to yourself.
