ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
WARNING
When using compressed air, wear protective glasses and use
clean, low-pressure air, 30 psi (206.8 kPa) maximum. Failure
to follow these instructions could result in eye injury.
WARNING
Cleaning solvents are flammable and toxic to eyes, skin, and
respiratory tract.
Skin/eye protection required.
Avoid
repeated/prolonged contact.
Good general ventilation is
normally adequate.
(2) Clean LOP solenoid with dry, filtered, compressed air and electrician's brush or
wipe with cleaning cloth (Item 4, Appendix E) lightly moistened with an approved
cleaning solvent (Item 19, Appendix E).
(3) Inspect LOP solenoid for cracked casing, stripped or damaged threads, corrosion,
deterioration of coil insulation, or other damage.
(4) Install LOP solenoid, refer to paragraph 4.49.e.
