TM 9-6115-650-14&P
Figure 4-11. Switch to Load Terminal Wire Replacement.
(1) Removal.
(a)
(b)
(c)
Remove 16 screws (1), 16 Iockwashers (2), and 16 flat washers (3) securing cover (4) to switch box
(5) and take cover off switch box.
Remove nut (6) and flat washer (7) from load terminal stud (8) inside switch box (5). Slide wire
terminal (9) off stud.
NOTE
When removing more than one wire, tag switch terminals for identification.
Remove screw (10), nut (11 ) and star washer (12) securing wire terminal (13) to switch terminal (14).
Take wire off switch.
(2) Installation.
(a)
4-24
NOTE
Observe identification tags on switch terminals when installing wires.
Position wire terminal (9) against underside of switch terminal (13). Insert screw (10) up through wire
terminal and switch terminal. Install star washer (12) and nut (11) on screw and tighten against
switch terminal.
