TM 9-6115-650-14&P
(4)
(5)
(6)
(7)
(8)
(9)
Cut off contact (4).
NOTE
Be careful not to strip too much insulation from wire.
onto insulation to hold securely.
Connector contact must be crimped
Strip insulation off wire lead (2) equal to depth of new contact (4).
Slide shell (1) and washer (3) of new connector onto wire lead (2).
Slide contact (4) onto stripped wire and solder in accordance with TB SIG 222.
Crimp contact onto wire.
Slide shell (1) forward over washer (3) and contact (4).
b. Female Connector Replacement. (See figure 4-14.)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
4-28
Slide shell (5) and sleeve (6) back on wire lead (7).
Cut off contact (8).
Slide shell (5) and sleeve (6) off wire lead (7).
NOTE
Be careful not to strip too much insulation from wire. Connector contact must be crimped
onto insulation to hold securely.
Strip insulation off wire lead (7) equal to depth of new contact (8).
Slide shell (5) and sleeve (6), onto wire lead (7).
Slide contact (8) onto stripped wire and solder in accordance with TB SIG 222.
Crimp contact onto wire.
Slide shell (5) and sleeve (6) forward over contact (8).
