TB 9-6115-645-13
14.
Remove plug from water pump and install elbow (1), Figure 5-5, and adapter (2).
15.
Install coolant hose, (4), to adapter (2) using clamp, (3).
16.
Using angle bracket (10), Figure 5-6, as a template, mark hole locations and drill 7/32" diameter holes in radiator
support.
17.
Install control unit bracket (10), Figure 5-6, using screws (6), flatwashers (7), lockwashers (8), and nuts (9), and then
install control unit (1), using screws (2), flatwashers (3), lockwashers (4), and nuts, (5) to control unit bracket.