TB 9-6115-645-13
4.
Remove the top 4 panel clips (8) from the baffle (5), Figure 5-2, save them because you will reinstall clips once the
heater (7) is mounted.
5.
Using mounting plate (6) mark and drill 4 9/32nds holes through baffle (5).
6.
Attach mounting plate (6) to baffle (5) and secure using screws (4), flatwashers (3), lockwashers (2), and nuts (1).
Attach the mounting brace (7) making sure the longer legs are towards the top of heater. Secure the brace using
flatwashers (3), lockwashers (2), and nuts (1). Install clips (8) taken off in step 4.
