TB 9-6115-645-13
INSTALLATION
NOTE
Use packing list provided with kit.
1.
Open battery access door and disconnect negative battery from left battery and the positive battery cable from the
right battery before doing the following procedures. Failure to observe this warning could result in severe personal
injury or death.
2.
Open right side engine compartment door.
3.
Install air inlet hose (11), Figure 5-1, to heater (3), using clamp (10). Install coolant hose (4), to heater coolant intake
using clamp (2). Install coolant hose (1), to heater coolant using clamp (2). Install fuel butt splice (8) to heater fuel
intake using clamp (7).
