TM 9-6150-226-13
4-14 LANYARD, PANEL BOARD, AND CIRCUIT BREAKERS. (cont)
2.
INSTALL CIRCUIT BREAKER.
a.
b.
c.
d.
If you have PDISE equip-
ment, follow instructions
in paragraph 2C and d.
Hook circuit breaker (12) on
support rail, swing down into
place, and secure with
screws (13).
Connect internal wiring to
circuit breaker (12) and
remove tags.
Torque circuit
breaker wire lug in accordance
with Table G-1.
Place circuit breaker (15)
on support rails, and secure
with screws (16).
Connect internal wires (14)
to circuit breaker (15) and
remove tags.
Torque circuit
breaker wire lug (17) in
accordance with Table G-1.
4-41
