TM 9-6150-226-13
c.
Remove only those parts requiring repair or replacement. Tag similar
parts to ensure correct assembly.
Do not disassemble a component any further
than necessary to accomplish needed repairs.
d.
Refer to wiring diagrams (Fig.
4-1 thru 4-11) and identifying tags
when assembling DISE and PDISE equipment.
Wires are marked to aid you in
assembly of the feeder/distribution centers.
e. Maintenance procedures are for both the DISE and PDISE equipment.
When the procedures for PDISE models (M200 A/P, M1OO A/P, M60 A/P and M40 A/P)
are different than DISE models,
a note will be listed and PDISE instruction
will follow.
4-13.
PAINTING.
a.
Remove rust, corrosion,
and flaked and peeling paint.
Ensure
surfaces to be painted are dry.
Refer to TM 38-230-1, Packaging of Materiel:
Preservation.
b.
Use masking tape (item 10, App E) and mask connectors and data plates
that are not to be painted.
c.
Use paint (item 7, App E) and paint surfaces as required to protect
against deterioration.
Refer to TM 43-0139, Painting Instructions for Army
Materiel.
CAUTION
Torquing of all circuit breaker lugs must be
performed in accordance with Appendix G, Table
G-1.
4-37
