TM 9-6150-226-13
MAINTENANCE OF FEEDER/DISTRIBUTION CENTER ENCLOSURE ASSEMBLIES
4-14 LANYARD, PANEL BOARD, AND CIRCUIT BREAKERS.
This task covers:
a.
Replacement
b.
Test
INITIAL SETUP
Tools
General Safety Instructions
General Mechanic’s Automotive Tool Kit
SC 5180-90-CL-N26
WARNING
Screwdriver, flat tip, 3/8-inch,
12-inch length
High voltage is present in this
system.
DISE and PDISE supports
equipment using 120/208 V ac. Do
not replace a circuit breaker
with the power on.
Death or
serious injury may result.
REPLACEMENT
CAUTION
Failure to support the lid
after lanyards are removed
may result in damage to the
hinges.
1.
REMOVE LANYARDS.
Remove screws (1), nuts (2),
washers (3), and lanyards (4)
from box and lid.
4-38
