4-39
TM 9-6150-226-13
4-14 LANYARD, PANEL BOARD, AND CIRCUIT BREAKERS. (cont)
2.
REMOVE COVER PANELS.
NOTE
If you have PDISE equip-
ment follow instructions
in 2C and d.
a.
Remove screws (5) securing
inspection cover (6) to
distribution center.
b.
Remove inspection cover (6).
c.
Remove screws (7) securing panel
cover (8) to distribution center.
d.
Remove panel cover (8).
3.
REMOVE CIRCUIT BREAKER PANEL.
DISE only
a.
Remove screws (9) securing
panel to bus bar assembly.
Tag and disconnect phase
indicator lights (10) from
circuit breaker and neutral
bus bar.
b.
Remove circuit panel (11).
4.
REMOVE CIRCUIT BREAKER.
a.
b.
c.
NOTE
If you have PDISE equip-
ment follow instructions
in paragraph 4d, e and f.
Tag and disconnect internal
wiring from circuit
breaker (12).
Loosen screws (13) securing
circuit breaker to bus bar
assembly.
Tilt circuit breaker (12)
away from bus bar assembly
and remove circuit breaker.
