TM 9-6115-729-24
0098
INSTALLATION - Continued
12. Remove tag and connect turbo inlet pressure sensor to engine harness connector ENG-P15 (WP 0100).
13. Remove tag and connect magnetic speed pickup to engine harness connector ENG-P14 (WP 0100).
14. Remove tags and disconnect wires to fuel level sender (WP 0061).
15. Remove tags and connect wires to alternator (WP 0072).
16. Remove tags and connect wires to fuel level switch (WP 0055).
17. Install air cleaner system (WP 0071).
18. Install radiator (WP 0067).
19. Remove tags and connect coolant hoses to engine (WP 0066).
20. Install fan guards and shrouds (WP 0065).
21. Install auxiliary fuel pump assembly and solenoid valve (WP 0058).
23. Install engine generator compartment ceiling assembly (WP 0031).
24, Install exhaust system (WP 0071).
25. Install surge tank (WP 0064).
26. Install coolant recovery system bottle (W 0063).
27. Install rear roof section housing assembly (WP 0030).
28. Install control box assembly (WP 0041).
30. Install batteries (WP 0049).
END OF TASK
END OF WORK PACKAGE
0098-5/6 blank
