ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
Engine:
Fuel filter assembly (figure 4-13)
Air filter (figure 4-16)
Exhaust system (figure 4-17)
Low oil pressure switch (figure 4-47)
Engine shutdown cable (figure 4-49)
Governor regulator bracket (run/stop controls) (figure 4-52)
Recoil starter (figure 4-56)
Starter (figure 4-59)
Fuel Tank:
Brackets (figure 4-15, items 8 and 10)
Drain cock (figure 4-15, item 14)
Guard (figure 4-15, item 11)
2. Deprocessing Servicing.
2.1 Perform the Before Preventive Maintenance Checks and Services (table 2-2).
Item 1
Control panel
Instrument panel
Item 2
Ground terminal stud (para. 2.7.a for installation of ground rod)
Item 3
Identification and Instruction Plates
Item 4
Load terminals (para. 2.7.b for placement of load cables)
Item 5
Air Intake Cover Wing Nut
Item 6
Filter Assembly, Fuel (use para. 2.7.c for priming and bleeding the fuel system)
Item 7
Fuel system; use the required fuel for the operating environment.
Item 8
Crankcase Oil (figure 2-1, item 8) use the required oil for the operating
environment.
Item 9
Cylinder head cooling fins and recoil starter cover.
Item 10
Spark arrestor.
2.2
During Preventive Maintenance Checks and Services (table 2-2).
Follow the Initial adjustment and checks/operating procedures to operate the set,
placement of the intake cover and limitation of load (75%) (para. 2.8).
M-3
