ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
No output from
alternator (MEP-531A)
Check that alternator harness
OK
Not OK
connector (P1) is connected to
control panel receptacle J2
Test for defective ON-OFF
Connect alternator
OK
Not OK
load circuit breaker (CB1)
harness connector (P1)
refer to paragraph 4.41.b
With multimeter set for ohms, check
Replace defective ON-OFF
Not OK
OK
continuity in wires J1-B
FL1-N,
load circuit breaker (CB1)
FL1-N
E, and
refer to paragraph 4.41
CB1-B(LOAD)
FL1-L
Remove and inspect for
OK
Repair or replace
defective brushes,
defective wiring
refer to paragraph 4.12.4
Not OK
OK
Test for defective EMI filter (FL1),
refer to paragraph 4.47.c
Not OK
Contact next higher
Replace EMI filter (FL1),
maintenance level
refer to paragraph 4.47
Replace alternator brushes
refer to paragraph 4.12.4
