ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
No output from
alternator (MEP-501A)
Check that alternator harness
OK
Not OK
connector (P1) is connected to
control panel receptacle J2
Test for defective ON-OFF
Connect alternator
OK
Not OK
load circuit breaker (CB1)
harness connector (P1)
refer to paragraph 4.41.c
With multimeter set for ohms,
Replace defective ON-OFF
Not OK
OK
check continuity in wires
load circuit breaker (CB1)
J1-C
(-) and
refer to paragraph 4.41
CB1-P1 (LOAD)
(+)
Repair or replace
Contact next higher
defective wiring
maintenance level
