ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
Figure 4-4. Fuel Injector Replacement
c.
Installation.
(1) Clean fuel injector sleeve surface in cylinder head.
(2) Install new gasket (Figure 4-4), spacer, and fuel injector in cylinder head.
NOTE
Ensure fuel injector is positioned to connect pressure fuel line
prior to securing in cylinder head.
(3) Secure fuel injector in cylinder head with retainer and nuts. Torque nuts evenly to
7-9 lbs-ft (9-12 Nm).
(4) Connect pressure and return fuel lines. Bleed fuel system if necessary, refer to
a.
Removal.
(1) Shut down generator set.
(2) Remove control panel assembly, refer to paragraph 4.20.b.
(3) Remove capscrews (Figure 4-5), lockwashers, and guard from alternator.
