ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
SLOT IN ARRESTER
CLAMP
CONTROL PANEL ASSEMBLY.
a.
Inspection.
(1) Shut down generator set.
(2) Inspect control panel assembly for security, cracked and corroded panels, loose
wires, missing parts, and other damage.
b.
Removal.
(1) Shut down generator set.
(2) Unscrew and disconnect engine and alternator harness plugs (Figure 4-19) from
receptacles at bottom of control panel assembly.
(3) Remove nut, lockwasher, and ground strap from frame.
(4) Remove LOP engine shutdown cable from control panel assembly, refer to
(5) Remove locknuts that hold control panel assembly to frame.
(6) Remove control panel assembly from frame.
