ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
INSTRUMENT COVER.
a.
Inspection.
(1) Shut down generator set.
(2) Inspect instrument cover for security, cracks, corrosion, and other damage.
b.
Removal.
(1) Shut down generator set.
(2) Release instrument panel by turning fastener, open instrument panel slowly.
(3) Release instrument cover by turning fastener, open instrument cover.
(4) Remove rivets (Figure 4-21) and instrument cover from instrument panel.
(5) If necessary, remove nut, lockwasher, washer, and standoff from instrument panel.
c.
Repair.
WARNING
CARC paint dust is a health hazard. Wear protective eyewear,
mask, and gloves when sanding CARC painted surfaces.
Failure to comply can cause personal injury.
(1) Repair all dents and cracks, and remove all loose paint.
(2) Remove light corrosion with fine grit abrasive paper (Item 16, Appendix E).
(3) Repaint surface in accordance with TM 43-0139/TO 35-1-3.
d.
Installation.
(1) If removed, install standoff (Figure 4-21) on instrument panel with washer,
lockwasher, and nut.
(2) Install instrument cover on instrument panel with new rivets.
(3) Close and secure instrument panel and instrument cover.
