ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
a.
Removal.
(1) Shut down generator set.
(2) Remove wing nut (Figure 4-3), cover, and filter element with pre-filter.
(3) Remove pre-filter from filter element.
(4) If necessary, remove gaskets from mounting plate and cover. Clean adhesive
residue from surfaces.
b.
Inspection/Cleaning.
(1) Inspect cover for cleanliness, cracks and other damage. Clean cover with mild
soap and water.
(2) Inspect filter element for cleanliness, dents, and crushed corrugations.
(3) Replace damaged parts.
MOUNTING
PLATE
GASKET
PRE-FILTER
COVER
WING
NUT
FILTER
ELEMENT
GASKET
(4) Replace filter element if dirty.
(5) Replace pre-filter.
c.
Installation.
(1) If removed, install new gaskets (Figure 4-3) on mounting plate and cover.
