ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-23. VOLTAGE ADJUST RHEOSTAT MAINTENANCE - cont.
3.
Remove and replace any component that is damaged to the extent that it will effect the safe operation of
the generator set.
C. INSTALLATION.
1.
Connect electrical wiring to the rear of VOLTAGE ADJUST rheostat (3, Figure 4-14) and secure using
soldering iron. Cover connection with heat shrink tubing and secure using heat gun.
2.
Mate rheostat (3) to rear of control panel (2) and install using lockwasher (7) and nut (6).
3.
Close control panel (2) and lock in place using quarter-turn fasteners (1).
4.
Secure knob (4) to shaft of rheostat (3) by tightening setscrews (5).
4-47
