ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-25. CONTROL BOX FUSE, DIODE, AND TERMINAL BLOCK MAINTENANCE - cont.
C. INSTALLATION.
1.
Install fuse holder (17, Figure 4-16) onto control box using nut (18). Install fuse (15) and cap (16).
2.
Mate terminal blocks TB4 (3) and TB6 (4), and identification plates (13, 14) to rear of control box. Secure
using standoffs (11) and lockwashers (12).
3.
Connect electrical wiring to terminal blocks TB4 (3) and TB6 (4). Install clear plastic covers (7, 8) using
screws (9) and lockwashers (10).
4.
Close main access cover and lock in place using latches.
5.
Install diodes (6) onto terminal block TB5 (1).
6.
Mate terminal blocks TB5 (1) and TB3 (2) to inside wall of control box. Secure using screw and captive
washer assemblies (5).
7.
Connect electrical wiring to terminal blocks TB5 (1) and TB3 (2).
8.
Close control panel and lock in place using quarter-turn fasteners.
Figure 4-16. Terminal Blocks, Fuse, and Diodes
4-51
