ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-27. CONTROL BOX WIRING HARNESS MAINTENANCE - cont.
C. INSTALLATION.
1.
Mate control box harness connector J7 (1, Figure 4-18) to inside wall of control box. Secure using four
screws with captive washers (5).
2.
Connect control box harness wires to control box components. Refer to Figures FO-3, 60Hz Control Box
Wiring Harness, and FO-4, 400 Hz Control Box Wiring Harness, for information.
3.
Install clamp (6) using screw and captive washer assembly (7) and washer (8). Install clamp (0) using nut
(10) and lockwasher (11).
4.
Close control panel (2) and lock in place using quarter-turn fasteners (3).
5.
Connect generator set wiring harness plug P7 to control box harness connector J7 (1).
6.
Close main access cover and lock in place using latches.
Figure 4-18. Control Box Wiring Harness
4-55
