ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-20. EMERGENCY STOP SWITCH MAINTENANCE - cont.
4.
Remove and replace any component that is
damaged to the extent that it will effect the safe
operation of the generator set.
C. INSTALLATION.
1.
Install push button (6, Figure 4-11) onto control
panel (2) using locknut (7), and gasket (8).
2.
Install EMERGENCY STOP switch (3) onto rear
of control panel (2). Rotate lever (5) to lock
switch in place. Install locking tab (4).
3.
Connect electrical wiring to the rear of
EMERGENCY STOP switch (3).
4.
Close control panel (2) and lock in place using
quarter-turn fasteners (1).
Figure 4-11. EMERGENCY STOP Switch
(Sheet 2 of 2)
4-42
