ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
e.
Installation.
(1) Connect flywheel diode assembly (Figure 4-41) at terminal board and at START-
PREHEAT/PREHEAT/OFF/START rotary switch. Remove tags.
(2) Install EMI filter, refer to paragraph 4.47.d (MEP-531A).
(3) Close and secure instrument panel.
DIESEL ENGINE WIRING HARNESS AND GASKET, CONTROL PANEL.
a. Inspection.
(1) Shut down generator set.
(2) Release instrument panel by turning fastener, open instrument panel slowly.
(3) Visually inspect control panel engine wiring harness wiring for cracked or
deteriorated insulation, broken terminals, and other damage.
(4) Visually inspect the engine wiring harness receptacle for security, cracks, broken
wires, and other damage.
(5) Close and secure instrument panel.
