ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
(4) Inspect the load terminals for deformed threads, corrosion, or other physical
damage.
(5) Ensure that the connections to the load terminals are clean and tight. Replace if
defective.
(6) Close and secure instrument panel.
(7) Close and secure lug cover.
b.
Removal.
(1) Shut down generator set.
(2) Release lug cover by turning two fasteners, open lug cover.
(3) Disconnect load cables from load terminals (Figure 4-37) as necessary.
(4) Release instrument panel by turning fastener, open instrument panel slowly.
(5) Remove locknuts, washers, transient suppressor assembly, and nuts from load
terminals.
(6) Tag and remove electrical leads from load terminals.
OP
ER
ATI
NG
INS
TRU
CTI
RT
STA
F
OF
T
EA
EH
PR
RT
STAEAT
EH
PR
CA
UT
IO
120 N
VD
C
LOAD
WASHERS
TERMINALS
NUTS
WASHER
LOCKNUT
TRANSIENT
SUPPRESSOR
ASSEMBLY
WASHER
LOCKNUT
