ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
Removal.
(1) Shut down generator set.
(2) Release instrument panel by turning fastener, open control panel slowly.
(3) Tag and disconnect START-PREHEAT/PREHEAT/OFF/START rotary switch
(4) Remove screw and knob from START-PREHEAT/PREHEAT/OFF/START rotary
switch.
(5) Remove nut, instruction plate, and START-PREHEAT/PREHEAT/OFF/START
rotary switch from control panel.
d.
Installation.
(1) Insert START-PREHEAT/PREHEAT/OFF/START rotary switch (Figure 4-34) into
control panel.
(2) Position instruction plate over START-PREHEAT/PREHEAT/OFF/START rotary
switch and secure both in control panel with nut.
(3) Install screw and knob on START-PREHEAT/PREHEAT/OFF/START rotary switch.
(4) Connect electrical leads and remove tags.
(5) Close and secure instrument panel.
4-92
