ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
(6) Reconnect transient suppressor assembly.
(7) Close and secure instrument panel.
d.
Repair. Repair transient suppressor assembly by assembling the transient suppressor
assembly and terminals in accordance with Appendix G, Figure G-14.
e.
Installation.
(1) Install transient suppressor assembly (Figure 4-30) on load terminals (+) and
(-)
with locknuts and washers.
(2) Close and secure instrument panel.
FUSEHOLDER (S).
a.
Inspection.
(1) Shut down generator set.
(2) Release instrument cover by turning fastener, open instrument cover.
(3) Release instrument panel by turning fastener, open instrument panel slowly.
(4) Inspect fuseholder for security, cracked cap, corrosion, and other damage.
(5) Inspect fuse for cracks and burned out element.
(6) Close and secure instrument panel and instrument cover.
b.
Removal.
(1) Shut down generator set.
(2) Release instrument panel by turning fastener, open instrument panel slowly.
(3) Tag and disconnect electrical leads from fuseholder (Figure 4-31).
(4) Release instrument cover by turning fastener, open instrument cover.
(5) Remove nut.
(6) Remove fuseholder, complete with fuse.
(7) If necessary, remove cap and fuse.
