ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
SEE NOTE
1
1
4
2
2
3
+
(CR3)
(CR2)
5.50
[139.70]
NOTES:
PROCEDURES:
1. Dimensions are shown in inches and
dimensions in [ ] are in millimeters.
NOTE
Install diodes (2) to orient cathode indicator band
2. Refer to Appendix F, Fig. F-32, for materials
as shown.
required.
1. Crimp terminal lugs (1) to each diode (2).
2. Slide splice (3) over wire of each diode (2) and
crimp.
3. Install marker (4) over diodes (2) and splice (3)
and heat shrink to a firm fit.
