ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
Figure 4-36. NATO Slave Receptacle
c.
Installation.
(1) Insert NATO slave receptacle (Figure 4-36) with gasket into control panel.
(2) Position bracket and cover on NATO slave receptacle.
(3) Secure NATO slave receptacle, bracket, and cover to control panel with screws,
washers, lockwashers, and nuts.
(4) Connect electrical leads to NATO slave receptacle and remove tags.
(5) Close and secure instrument panel.
a.
Inspection.
(1) Shut down generator set.
(2) Release instrument panel by turning fastener, open instrument panel slowly.
(3) Release lug cover by turning two fasteners, open lug cover.
