ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
4-178
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove fuel pickup, step a above.
(3)
Inspect fuel pickup for clogs, stripped threads, and other damage.
(4)
Replace damaged parts.
(5)
Install fuel pickup, step c below.
c. Installation.
(1)
Remove cover from fuel tank opening.
(2)
Thoroughly clean mating surfaces for new gasket (46, Figure 4-26). Ensure no foreign material
enters fuel tank. Apply sealant (Item 21, Appendix E) to both sides of gasket. Position gasket on
fuel tank.
(3)
Install adapter (47) on fuel pickup (45).
(4)
Install fuel pickup (45), washers (44), lockwashers (43), and screws (42) on fuel tank.
(5)
Connect hose (41) to adapter (47).
(6)
Close engine compartment access doors.
(7)
Connect negative battery cable to battery, and close BATTERY ACCESS door.
4.11.7 Ether Cylinder Assembly.
a. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open right side engine compartment access doors (Figure 1-2).
(3)
Loosen wingnut (1, Figure 4-27), and unscrew ether cylinder (2) from ether solenoid valve (3).
(4)
Install cap (4) on ether solenoid valve (3).
(5)
Remove nuts (5), lockwashers (6), washers (7), cylinder bracket assembly (8), and bolts (9) from
generator set housing.
b. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open right side engine compartment access doors (Figure 1-2).
