TM 9-6115-664-13&P
4-30. FUEL MODULE MAINTENANCE
This task covers removal, inspection, repair, and installation
INITIAL SETUP
Tools:
Equipment Condition:
Shop Equipment, Automotive Maintenance
APU Shut Down
and Repair (Item 1, App. B)
A.
REMOVAL
WARNING
Disconnect
electrical
cable
from
NATO receptacle before performing
any maintenance on the fuel module.
Failure to do so can result in
electrical shock.
NOTE
Discard and replace all lockwashers
and locknuts when removed.
1.
Disconnect
NATO
plug
from
fuel
module
receptacle. Disconnect vehicle fuel supply hose
from fuel fitting.
2.
Open top rear cover on enclosure by turning
latches.
3.
Slide fuel module cover latches (3, Figure 4-20)
back to disengage, and remove fuel module cover
(1) from fuel module enclosure (2).
4.
Remove cover latches (3) and locking screws only
if replacement is required.
Figure 4-20. Fuel Module (Sheet 1 of 4)
4-74
