TM 9-6115-664-13&P
4-30.
FUEL MODULE MAINTENANCE
C.
REPAIR.
Repair of the fuel module assembly is limited to
removal and replacement of defective components.
Refer to applicable task for component removal and
replacement procedures.
D.
INSTALLATION.
1.
Mate fuel module enclosure (2, Figure 4-20) to APU
enclosure
and
secure
using
six
bolts
(18),
lockwashers (19), and washers (20).
2.
Install plate clip (12) using two screws (13),
lockwashers (14), and washers (15).
3.
Install latch block (18) using screws (17).
4.
Connect fuel supply line (8) to fitting (9).
Connect fuel return line (10) to fitting (11).
5.
Connect electrical cables (6) to feed-thru studs (7)
using stud nuts and washers.
6.
Connect electrical wiring connector (4) to electrical
receptacle (5).
Figure 4-20. Fuel Module
(Sheet 3 of 4)
4-76
