TM 9-6115-664-13&P
4-31.
FUEL FILTER WATER SEPARATOR MAINTENANCE
This task covers inspection and repair.
INITIAL SETUP
Tools:
Equipment Condition:
Shop Equipment, Automotive Maintenance
Fuel Module Removed (Para. 4-30)
and Repair (Item 1, App. B)
Parts/Materials:
Sealant, Thread (Item 4, App. E)
A.
REMOVAL
NOTE
Discard and replace all lockwashers
and locknuts when removed.
1.
Slide fuel module cover latches (3, Figure 4-21)
back to disengage, and remove fuel module cover
(1) from fuel module enclosure (2).
2.
Remove cover latches (3) and locking screws only if
replacement is required.
3.
Open drain valve (4) and drain trapped water
through hose (5). Close drain valve and disconnect
hose.
4.
Unscrew filter ring (6) from filter header (7).
5.
Remove filter element (8) from filter header (7).
Discard element.
6.
Tag fuel hoses (9). Disconnect fuel hoses from
elbows (10, 11). Remove elbows from fuel filter
header (7).
7.
Remove filter header (7) from fuel module by
removing screws (12), washers (13), and locknuts
(14).
Figure 4-21. Filter Water Separator
4-78