TM 9-6115-664-13&P
4-13. OIL FILTER ACCESS DOOR MAINTENANCE
4. Inspect gaskets for security of attachment, cuts, tears, deterioration, or other damage.
C. REPAIR.
1. Remove and replace damaged door gasket as required. Cut bulk gasket to length and secure by peeling off back
tape to expose adhesive.
2. Repair painted and stenciled surfaces in accordance with Para. 4-11.
3. Repair of parts, other than painting, is limited to removal and replacement of damaged components.
D. INSTALLATION.
1. Install two door latches (1, Figure 4-3) onto APU enclosure using screws (7), washers (8), and locknuts (9). Screw
detent plungers (10) into enclosure.
2. Place door (2) in position on enclosure. Secure hinge (6) to enclosure surface using four screws (3), eight washers
(4), and four locknuts (5).
3. Close door (2) and lock by turning door latches (1).
4. Connect NATO plug to receptacle and secure using strap.
4-43
