TM 9-6115-664-13&P
4-12.
COVER ASSEMBLY MAINTENANCE
7. Install latches (18), gaskets (21), and mounting
blocks (19) onto covers using screws (20). Secure
pawls (16) to latch shafts using setscrews (17).
Install setscrews (22).
F. INSTALLATION.
1. If removed, install control panel mounting block onto
mounting bracket (8, Figure 4-2).
2. Install mounting bracket (9) onto enclosure using
four screws (13), eight washers (14), and four
locknuts (15).
3. Install mounting bracket (8) onto enclosure using
four screws (10), eight washers (11), and four
locknuts (12).
WARNING
Cover
assembly
is
heavy
and
awkward. Enlist help of an assistant
when installing.
4. With the help of an aide, carefully lift cover assembly
and place on top of enclosure. Mate cross member
mounting holes with holes in brackets.
5. Secure cross member (7) to brackets (8, 9) using
four screws (4), eight washers (5), and four locknuts
(6).
6. Install control panel assembly (Para. 4-20).
7. Lower covers (2, 3) and lock in place using latches
(1).
Figure 4-2. Cover Assembly
(Sheet 4 of 4)
4-41
