TM5-6115-640-14&P
4-29. ANTENNA MAST MOUNT REPLACEMENT, AN/MJQ-32 ONLY.
This task covers:
1. Removal
2. Installation
Initial Setup:
1.
Tools - General Mechanics Tool Kit (5180-00-177-7033)
2.
Materials/Parts - Mount (97403); 13228E9897-1
Each of the two antenna mast mounts is located on each side of the front generator.
a.
Removal.
(1)
Remove four locknuts (1, figure 4-16), eight flat washers (2), and four screws (3), securing mast mount (4) to
front fender extension.
(2)
Remove mast mount from front fender extension.
b.
Installation.
(1)
Position mast mount (4) on front fender extension (5).
(2)
Insert four screws (3) and four flat washers (2) through mast mount and front fender extension.
(3)
Install four flat washers (2) and locknuts (1) on each screw (3). Tighten hardware to secure mast mount to fender
extension.
4-30. ANTENNA MAST SUPPORT REPLACEMENT, AN/MJQ-32 ONLY.
This task covers:
1. Removal
2. Installation
Initial Setup:
1.
Tools - General Mechanics Tool Kit (5180-00-177-7033)
2.
Materials/Parts - Mount Support (97403); 13228E9897-2
4-50
